W10295370A vs EDR1RXD1
What's the Difference?
The definitive guide to understanding Whirlpool's legacy filter number and its modern EveryDrop replacement β so you always order the right filter.
W10295370A and EDR1RXD1 are the same filterW10295370A is Whirlpool's original part numberβnow officially replaced and rebranded as theΒ EveryDrop Filter 1 (EDR1RXD1)Same fit, same performance, upgraded certification.
What Is the W10295370A Filter?
The W10295370A is a Whirlpool OEM part number for a refrigerator water filter used in millions of Whirlpool, KitchenAid, Maytag, Amana, and Kenmore refrigerators. It was the go-to replacement filter for over a decade β a twist-and-lock design that sat inside the upper-right corner of the refrigerator compartment.
Whirlpool eventually consolidated its filter lineup under the EveryDrop brand, and the W10295370A was officially retired and replaced by the EDR1RXD1 (EveryDrop Filter 1). The part number W10295370A still appears on older refrigerators and in search results β which is exactly why this comparison matters.
What Is the EDR1RXD1 (EveryDrop Filter 1)?
The EDR1RXD1 is the current, actively sold EveryDrop Filter 1 β Whirlpool's official replacement for the W10295370A. It is the only filter approved by Whirlpool, Maytag, Amana, KitchenAid, and JennAir brands for compatible refrigerators.
W10295370A vs EDR1RXD1: Full Comparison
| Feature | W10295370A | EDR1RXD1 (EveryDrop Filter 1) |
|---|---|---|
| Status | Discontinued | Current Model |
| Brand | Whirlpool (legacy) | EveryDrop by Whirlpool |
| Filter Type | Refrigerator Ice & Water | Refrigerator Ice & Water |
| Physical Fit | Identical | Identical |
| NSF 42 (Chlorine/Taste) | Certified | Certified |
| NSF 53 (Lead/Health) | Certified | Certified |
| NSF 401 (Pharmaceuticals) | Not listed | Certified |
| Contaminants Reduced | Basic | 28+ contaminants |
| Filter Capacity | 200 gallons / 6 months | 200 gallons / 6 months |
| Flow Rate | ~0.5 GPM | 0.5 GPM |
| Installation | Twist-and-lock | Twist-and-lock |
| OEM Approved | Whirlpool only | Whirlpool, Maytag, Amana, KitchenAid, JennAir |
| Available to Buy | No (discontinued) | Yes β In Stock |
π± Scroll horizontally on mobile to see full table
NSF Certifications: Why EDR1RXD1 Wins
The EDR1RXD1 carries three NSF/ANSI certifications β the gold standard for water filter safety and performance. These aren't marketing claims; they're independently verified by NSF International.
Which Refrigerators Does the EDR1RXD1 Fit?
The EDR1RXD1 is compatible with 38+ model numbers across Whirlpool, KitchenAid, Maytag, Amana, Kenmore, and JennAir. If your fridge previously used a W10295370A, it will accept the EDR1RXD1 with zero modifications.
Not sure if your model is compatible? Check the full list on the EDR1RXD1 product page.
How to Replace Your W10295370A with EDR1RXD1
Swapping your old W10295370A for the EDR1RXD1 takes under 2 minutes. No tools required.
-
Locate the filterFind the filter housing in the upper-right corner inside your refrigerator compartment.
-
Remove the old filterTurn the W10295370A counterclockwise about a quarter turn and pull it straight out.
-
Prepare the new EDR1RXD1Remove the protective cap from the new filter. Do not remove the O-rings.
-
Insert and lockPush the EDR1RXD1 into the housing and turn clockwise until it locks. You'll feel a firm click.
-
Flush the filterRun 4 gallons (about 5 minutes) of water through the dispenser to clear carbon fines before drinking.
-
Reset the filter indicatorHold the filter reset button on your control panel for 3 seconds to reset the change light.
π The Verdict: Get the EDR1RXD1
The W10295370A is discontinued. The EDR1RXD1 is its direct, OEM-approved replacement with better certifications and the same perfect fit. Don't settle for aftermarket guesses β get the filter Whirlpool actually recommends.
π Shop EDR1RXD1View W10295370A Replacement
0 comments